Integrated Zirconia Oxygen Analyzer

Integrated Zirconia Oxygen Analyzer

Anhui Tianfen Instrument Co., Ltd. Zirconia Oxygen Analyzer

　　Technical Parameters

　　Zirconia Oxygen Transmitter

　　·Protection Level: IP66

　　·Display: LCD, Chinese menu (English optional)

　　·Measurement Range: 0-100%, factory default 0-25% (optional 0.01ppm-20000ppm)

　　·Measurement Accuracy: ±0.1%O2 of display value

　　·Temperature Control Accuracy: ±0.5℃

　　·Output: 4-20mA (RS485/HART optional)

　　·Calibration Method: Semi-automatic (expandable to fully automatic calibration)

　　·Power Supply: 100-240VAC/50Hz

　　·Power Consumption: Less than 150W

　　·Maximum Load: ≤ 500Ω

　　·Ambient Temperature: -20℃～ +65℃

　　·Service Life: 5-10 Years

　　Zirconia Oxygen Detector Parameters

　　·Protection Level: IP65

　　·Body Material: 316SS (optional 310S, HC)

　　·Probe Diameter: φ51mm (optional φ32mm, φ38mm)

　　·Flange Specification: JIS-5K-65-FF

　　·Flue Gas Temperature: 0-650℃

　　·Flue Gas Pressure: -500kPa~+5kPa

　　·Flue Gas Flow Rate: >5m/s

　　·Ambient Temperature: -30℃ +70℃

　　·Response Time: <5s (90% response time when standard gas is introduced)

　　·Measurement Accuracy: ±0.1%O2 of display value

　　·Flange Specification: JIS-5K-65-FF (or as specified by customer)

　　Mainly applied in: Steel metallurgy heating furnaces, boilers in large thermal power plants, petrochemical hydrogenation units, paper mills, food industry, textile industry, various combustion equipment, such as municipal solid waste incinerators, hazardous waste incinerators, etc. ·Calibration Method: Semi-automatic (expandable to fully automatic calibration) ·Service Life: 1-5 Years (specifically determined by actual working conditions)

　　Anhui Tianfen Instrument Co., Ltd.

　　Contact Person: 潘学良

　　Phone: 18225808093