Under normal circumstances, the conditions for the normal operation of the zirconia analyzer are: the zirconia component is heated to 700℃ and maintained at a constant temperature of 700℃; also, the flue gas temperature at the installation point needs to be less than 700 degrees Celsius; and the output voltage matches the resistance value of the heating electric furnace wire.

　　Parameters of the zirconia analyzer we need to understand before inquiry and ordering:

　　1. Need to understand the industry, application, and any special requirements of the user enterprise;

　　2. For complete sets of orders, you need to understand:

　　1) Flue gas temperature;

　　2) Zirconia probe insertion depth;

　　3) Flange specifications and installation method;

　　4) Zirconia analyzer dimensions and installation method;

　　5) Zirconia analyzer range requirements.

　　3. Used with other manufacturers

　　Supplying zirconia analyzers from other manufacturers

　　Must know output voltage; analyzer installation method and dimensions; flue gas temperature and insertion depth; flange specifications and installation method;

　　Supplying oxygen probes from other manufacturers

　　Must know the resistance value of the oxygen probe's electric furnace wire; analyzer dimensions and installation method; analyzer range.

　　Tianfen Instrument Warm Reminder: During installation, if it is a newly built furnace, it needs to be installed and debugged. Install the zirconia analyzer after the furnace is dried, otherwise, it will greatly reduce the service life of the zirconia analyzer.

　　Precautions: 1. After receiving the goods, unpack and check if all accessories are complete, and if the sealing screw for the probe's standard gas inlet is properly tightened.

　　2. The filter port of the oxygen probe should face away from the direction of flue gas scouring;

　　3. When inserting the oxygen probe into the furnace, it should be inserted slowly; or before installation, power on the zirconia probe and let it reach a constant temperature of 700℃.

　　Consultation Hotline for Zirconia Oxygen Analyzer: 18225808093 Pan

　　Website: www.tf-yb.com