Anhui Tianfen Instrument Co., Ltd.

　　Professional manufacturer of zirconia analyzers

　　Zirconia probe connection method: threaded connection, thread specification G1-1/4

　　As people's awareness of environmental protection and energy saving gradually increases, more and more enterprises are beginning to focus on low energy consumption and environmental protection. After years of technological development, the TFZO-5/GD-LW zirconia oxygen probe developed by Tianfen Instrument Co., Ltd. is now widely used to measure the oxygen concentration in flue gas during combustion, helping various industries achieve considerable energy-saving effects and earning the trust of a wide range of enterprises.

　　CH88 Zirconia Oxygen Probe Technical Specifications

　　Flue gas temperature: 0-700℃

　　Flue gas pressure: -30KPa~+30KPa

　　Protective tube material: 316L Stainless Steel

　　Protective tube specification: Φ 45mm

　　Transmitter material: Cast aluminum

　　Display: LCD with Chinese menu

　　Instrument accuracy: 1%

　　Temperature control accuracy: ±1℃

　　Output: 4-20mA

　　Protection class: IP65

　　Power supply: 220V ±10%

　　Power: <150W

　　Range: 0-25% (programmable)

　　Service life: 1-5 years (depending on actual working conditions)

　　Probe length: 500mm, 800mm, 1000mm (other specifications customizable)

　　TFZO-5/GD-LW Zirconia Oxygen Probe Application Areas

　　Application areas include energy-consuming industries such as steel metallurgy, thermal power plants, petrochemicals, paper mills, food industry, textile industry, and also various combustion equipment such as waste incinerators, hazardous waste incinerators, small and medium-sized heating boilers, etc.

　　TFZO-5/GD-LW Zirconia Oxygen Probe Features

　　Flue gas does not directly contact the probe, preventing erosion and extending its service life. The zirconia cell is approximately 100m away from the flue gas, and there is also a filter in between, which can minimize the corrosive effect of flue gas on the zirconia cell. The flue gas only scours the guide tube and does not reach the probe at all. Even if the guide tube is worn through, only the guide tube needs to be replaced, and the probe can still be used.

Anhui Tianfen Instrument Co., Ltd. researches and produces power plant zirconia oxygen analyzers. Model: TFZO-5 Zirconia oxygen analyzer for power plants. Model: CY series zirconia oxygen analyzer. Power plant zirconia analyzer. Model: TKZO-5 Zirconia analyzer for power plants. Model: ZrO2-5 Zirconia oxygen meter for power plants. Model: NFZrO2-5 Zirconia oxygen meter for power plants ISG series. Power plant zirconia Model OXT3000 series. Power plant zirconia analyzer TKFX-ZOA-5. ZO-12B Zirconia oxygen analyzer.